Phasmophobia Evidence Not Showing Up: What to Check
Ghost orbs, fingerprints and DOTS fail. Check camera night vision, let the room cool, and see why a missing UV print does not rule out an Obake.
When evidence will not appear, the cause is usually the tool or the timing, not the ghost. This page covers the non-voice evidence failures — orbs, fingerprints, DOTS, and freezing — and the traps that make a correct reading look like a missing one. Voice-based evidence such as the Spirit Box has its own failure modes on the voice chat not working page.
Ghost Orbs need a night-vision camera in the favorite room
Ghost Orbs only show through a video camera with night vision, and they appear in the ghost’s favorite room. If you see nothing, check three things: the camera is actually on night vision, you are watching the favorite room (not just the room where the body was found), and you are not confusing dust with orbs. The ghost orbs guide walks through spotting them cleanly.
The Mimic fakes orbs on every hunt
The Mimic always produces Ghost Orbs as an ability, even though orbs are not one of its three real evidence types. That means orbs showing up does not confirm the Orbs evidence type — on a zero-evidence contract a Mimic still throws orbs in the ghost room. If orbs are your only lead, cross-check against the other two expected types before writing Orbs into your journal. The evidence cheat sheet lists which ghosts actually carry Orbs as real evidence.
UV fingerprints: a missing print does not clear the Obake
A UV light reveals fingerprints, but the Obake only produces its Ultraviolet evidence about 75% of the time. So a room with no prints does not rule out an Obake — you have to treat the absence as incomplete, not as a negative. Fingerprints also fade, so search the obvious surfaces (doors, light switches, the ghost’s favorite spot) early rather than late in the contract. The UV fingerprints guide covers where prints tend to land.
DOTS requires the projector or a camera
DOTS evidence is invisible to the naked eye; you need either the D.O.T.S Projector lighting the room or a video camera watching for the green laser grid. If you are staring at a dark room expecting to “see” DOTS, you will never find it. Set up the projector or a stationary camera in the favorite room and watch the recording. The DOTS projector guide explains the setup.
Freezing Temperatures need a cooled room and a thermometer
Freezing Temperatures is confirmed only by a thermometer reading strictly below 1°C. Two mistakes cause false negatives: reading the wrong room before it has cooled, and concluding “no freezing” from a single warm reading. The room takes time to drop to temperature, so let it sit and re-check with the thermometer rather than ruling it out on the first pass. The freezing temperatures guide gives the thresholds to watch for.
When to stop hunting for evidence
If you have ruled out the tool and timing errors above and still have no reading, the missing evidence may genuinely not be present — but never let a single incomplete check decide it. Work from the full evidence types list, confirm each tool was used correctly, and only then close the case.
Sponsored Looking for more to play? See what’s trending
Sources & References
This guide is verified against the game's own data and official communications. For patch notes, current balance, and authoritative specifics, consult the references below. Where a precise number cannot be verified, we explain the mechanic rather than invent a figure.
- Phasmophobia on Steam — patch notes, current season, and authoritative game data.